Struct charts::prelude::time::chrono::Months

use chrono::{Duration, NaiveDate, Months};

let from_ymd = NaiveDate::from_ymd;

assert_eq!(from_ymd(2014, 1, 1) + Months::new(1), from_ymd(2014, 2, 1));
assert_eq!(from_ymd(2014, 1, 1) + Months::new(11), from_ymd(2014, 12, 1));
assert_eq!(from_ymd(2014, 1, 1) + Months::new(12), from_ymd(2015, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) + Months::new(13), from_ymd(2015, 2, 1));
assert_eq!(from_ymd(2014, 1, 31) + Months::new(1), from_ymd(2014, 2, 28));
assert_eq!(from_ymd(2020, 1, 31) + Months::new(1), from_ymd(2020, 2, 29));

type Output = NaiveDate

The resulting type after applying the + operator.

source

impl Clone for Months

source

fn clone(&self) -> Months

Returns a copy of the value. Read more

1.0.0 · source

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

source

impl Debug for Months

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

source

impl Hash for Months

source

fn hash<H>(&self, state: &mut H) where
__H: Hasher,

Feeds this value into the given Hasher. Read more

1.3.0 · source

fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,

Feeds a slice of this type into the given Hasher. Read more

source

impl PartialEq<Months> for Months

source

fn eq(&self, other: &Months) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

source

fn ne(&self, other: &Months) -> bool

This method tests for !=.

source

impl PartialOrd<Months> for Months

source

fn partial_cmp(&self, other: &Months) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more

1.0.0 · source

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0 · source

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0 · source

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0 · source

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

source

impl Sub<Months> for NaiveDate

source

fn sub(self, months: Months) -> <NaiveDate as Sub<Months>>::Output

A subtraction of Months from NaiveDate clamped to valid days in resulting month.

Panics

Panics if the resulting date would be out of range.

Example

use chrono::{Duration, NaiveDate, Months};

let from_ymd = NaiveDate::from_ymd;

assert_eq!(from_ymd(2014, 1, 1) - Months::new(11), from_ymd(2013, 2, 1));
assert_eq!(from_ymd(2014, 1, 1) - Months::new(12), from_ymd(2013, 1, 1));
assert_eq!(from_ymd(2014, 1, 1) - Months::new(13), from_ymd(2012, 12, 1));

type Output = NaiveDate

The resulting type after applying the - operator.

source

impl StructuralPartialEq for Months

Auto Trait Implementations

impl RefUnwindSafe for Months

impl Send for Months

impl Sync for Months

impl Unpin for Months

impl UnwindSafe for Months

Blanket Implementations

source

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where
 T: FloatComponent,
 Swp: WhitePoint,
 Dwp: WhitePoint,
 D: AdaptFrom<S, Swp, Dwp, T>,

source

fn adapt_into_using<M>(self, method: M) -> D where
M: TransformMatrix<Swp, Dwp, T>,

Convert the source color to the destination color using the specified method Read more

source

fn adapt_into(self) -> D

Convert the source color to the destination color using the bradford method by default Read more

source

impl<T> Any for T where
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where
Scheme: ApproxScheme,

type Err = NoError

The error type produced by a failed conversion.

fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>

Convert the given value into an approximately equivalent representation.

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,

type Err = <Dst as ApproxFrom<Src, Scheme>>::Err

The error type produced by a failed conversion.

fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>

Convert the subject into an approximately equivalent representation.

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T, Dst> ConvAsUtil<Dst> for T

fn approx(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

Approximate the subject with the default scheme.

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

Approximate the subject with a specific scheme.

impl<T> ConvUtil for T

fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

Approximate the subject to a given type with the default scheme.

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

Approximate the subject to a given type with a specific scheme.

fn into_as<Dst>(self) -> Dst where
Self: Into<Dst>,

Convert the subject to a given type.

fn try_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: TryInto<Dst>,

Attempt to convert the subject to a given type.

fn value_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ValueInto<Dst>,

Attempt a value conversion of the subject to a given type.

source

impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,

source

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for T where
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<T, U> IntoColor for T where
U: FromColor<T>,

source

fn into_color(self) -> U

Convert into T with values clamped to the color defined bounds Read more

source

impl<T, U> IntoColorUnclamped for T where
U: FromColorUnclamped<T>,

source

fn into_color_unclamped(self) -> U

Convert into T. The resulting color might be invalid in its color space Read more

source

impl<T> ToOwned for T where
T: Clone,

type Owned = T

The resulting type after obtaining ownership.

source

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

source

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<Src> TryFrom<Src> for Src

type Err = NoError

The error type produced by a failed conversion.

fn try_from(src: Src) -> Result<Src, <Src as TryFrom<Src>>::Err>

Convert the given value into the subject type.

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<Src, Dst> TryInto<Dst> for Src where
Dst: TryFrom<Src>,

type Err = <Dst as TryFrom<Src>>::Err

The error type produced by a failed conversion.

fn try_into(self) -> Result<Dst, <Src as TryInto<Dst>>::Err>

Convert the subject into the destination type.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

source

impl<T, U> TryIntoColor for T where
U: TryFromColor<T>,

source

fn try_into_color(self) -> Result<U, OutOfBounds>

Convert into T, returning ok if the color is inside of its defined range, otherwise an OutOfBounds error is returned which contains the unclamped color. Read more

Struct charts::prelude::time::chrono::Months

Implementations

impl Months

pub fn new(num: u32) -> Months

Trait Implementations

impl Add<Months> for NaiveDate

fn add(self, months: Months) -> <NaiveDate as Add<Months>>::Output

type Output = NaiveDate

impl Clone for Months

fn clone(&self) -> Months

fn clone_from(&mut self, source: &Self)

impl Debug for Months

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl Hash for Months

fn hash<__H>(&self, state: &mut __H) where __H: Hasher,

fn hash_slice<H>(data: &[Self], state: &mut H) where H: Hasher,

impl PartialEq<Months> for Months

fn eq(&self, other: &Months) -> bool

fn ne(&self, other: &Months) -> bool

impl PartialOrd<Months> for Months

fn partial_cmp(&self, other: &Months) -> Option<Ordering>

fn lt(&self, other: &Rhs) -> bool

fn le(&self, other: &Rhs) -> bool

fn gt(&self, other: &Rhs) -> bool

fn ge(&self, other: &Rhs) -> bool

impl Sub<Months> for NaiveDate

fn sub(self, months: Months) -> <NaiveDate as Sub<Months>>::Output

type Output = NaiveDate

impl Copy for Months

impl Eq for Months

impl StructuralEq for Months

impl StructuralPartialEq for Months

Auto Trait Implementations

impl RefUnwindSafe for Months

impl Send for Months

impl Sync for Months

impl Unpin for Months

impl UnwindSafe for Months

Blanket Implementations

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where T: FloatComponent, Swp: WhitePoint, Dwp: WhitePoint, D: AdaptFrom<S, Swp, Dwp, T>,

fn adapt_into_using<M>(self, method: M) -> D where M: TransformMatrix<Swp, Dwp, T>,

fn adapt_into(self) -> D

impl<T> Any for T where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where Scheme: ApproxScheme,

type Err = NoError

fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where Dst: ApproxFrom<Src, Scheme>, Scheme: ApproxScheme,

type Err = <Dst as ApproxFrom<Src, Scheme>>::Err

fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>

impl<T> Borrow<T> for T where T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T, Dst> ConvAsUtil<Dst> for T

fn approx(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, DefaultApprox>,

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

impl<T> ConvUtil for T

fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, DefaultApprox>,

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

fn into_as<Dst>(self) -> Dst where Self: Into<Dst>,

fn try_as<Dst>(self) -> Result<Dst, Self::Err> where Self: TryInto<Dst>,

fn value_as<Dst>(self) -> Result<Dst, Self::Err> where Self: ValueInto<Dst>,

impl<Q, K> Equivalent<K> for Q where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

fn into(self) -> U

impl<T, U> IntoColor<U> for T where U: FromColor<T>,

fn into_color(self) -> U

impl<T, U> IntoColorUnclamped<U> for T where U: FromColorUnclamped<T>,

fn into_color_unclamped(self) -> U

impl<T> ToOwned for T where T: Clone,

type Owned = T

fn to_owned(&self) -> T

fn clone_into(&self, target: &mut T)

impl<Src> TryFrom<Src> for Src

type Err = NoError

fn try_from(src: Src) -> Result<Src, <Src as TryFrom<Src>>::Err>

fn hash<H>(&self, state: &mut H) where
__H: Hasher,

fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where
T: FloatComponent,
Swp: WhitePoint,
Dwp: WhitePoint,
D: AdaptFrom<S, Swp, Dwp, T>,

fn adapt_into_using<M>(self, method: M) -> D where
M: TransformMatrix<Swp, Dwp, T>,

impl<T> Any for T where
T: 'static + ?Sized,

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where
Scheme: ApproxScheme,

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

fn approx(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

fn into_as<Dst>(self) -> Dst where
Self: Into<Dst>,

fn try_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: TryInto<Dst>,

fn value_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ValueInto<Dst>,

impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T, U> IntoColor<U> for T where
U: FromColor<T>,

impl<T, U> IntoColorUnclamped<U> for T where
U: FromColorUnclamped<T>,

impl<T> ToOwned for T where
T: Clone,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<Src, Dst> TryInto<Dst> for Src where
Dst: TryFrom<Src>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

impl<T, U> TryIntoColor<U> for T where
U: TryFromColor<T>,

impl<V, T> VZip<V> for T where
V: MultiLane<T>,

impl<Src, Dst> ValueInto<Dst> for Src where
Dst: ValueFrom<Src>,

impl<T> Any for T where
T: Any,

impl<T> CloneAny for T where
T: Any + Clone,