Struct charts::prelude::sync::mpsc::SendError

1.0.0 · source · [−]

pub struct SendError<T>(pub T);

Expand description

An error returned from the Sender::send or SyncSender::send function on channels.

A send operation can only fail if the receiving end of a channel is disconnected, implying that the data could never be received. The error contains the data being sent as a payload so it can be recovered.

Tuple Fields

0: T

Trait Implementations

source

impl<T> Clone for SendError<T> where
T: Clone,

source

fn clone(&self) -> SendError<T>

Returns a copy of the value. Read more

source

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

source

impl<T> Debug for SendError<T>

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

source

impl<T> Display for SendError<T>

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

source

impl<T> Error for SendError<T> where
T: Send,

source

fn description(&self) -> &str

👎 Deprecated since 1.42.0:

use the Display impl or to_string()

fn source(&self) -> Option<&(dyn Error + 'static)>

The lower-level source of this error, if any. Read more

source

fn cause(&self) -> Option<&dyn Error>

👎 Deprecated since 1.33.0:

replaced by Error::source, which can support downcasting

source

fn provide(&'a self, req: &mut Demand<'a>)

🔬 This is a nightly-only experimental API. (error_generic_member_access)

Provides type based access to context intended for error reports. Read more

1.24.0 · source

impl<T> From<SendError<T>> for TrySendError<T>

source

fn from(err: SendError<T>) -> TrySendError<T>

Converts a SendError<T> into a TrySendError<T>.

This conversion always returns a TrySendError::Disconnected containing the data in the SendError<T>.

No data is allocated on the heap.

source

impl<T> PartialEq<SendError<T>> for SendError<T> where
T: PartialEq<T>,

source

fn eq(&self, other: &SendError<T>) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

source

fn ne(&self, other: &SendError<T>) -> bool

This method tests for !=.

source

impl<T> StructuralPartialEq for SendError<T>

Auto Trait Implementations

impl<T> RefUnwindSafe for SendError<T> where
T: RefUnwindSafe,

impl<T> Send for SendError<T> where
T: Send,

impl<T> Sync for SendError<T> where
T: Sync,

impl<T> Unpin for SendError<T> where
T: Unpin,

impl<T> UnwindSafe for SendError<T> where
T: UnwindSafe,

Blanket Implementations

source

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where
 T: FloatComponent,
 Swp: WhitePoint,
 Dwp: WhitePoint,
 D: AdaptFrom<S, Swp, Dwp, T>,

source

fn adapt_into_using<M>(self, method: M) -> D where
M: TransformMatrix<Swp, Dwp, T>,

Convert the source color to the destination color using the specified method Read more

source

fn adapt_into(self) -> D

Convert the source color to the destination color using the bradford method by default Read more

source

impl<T> Any for T where
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where
Scheme: ApproxScheme,

type Err = NoError

The error type produced by a failed conversion.

fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>

Convert the given value into an approximately equivalent representation.

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,

type Err = <Dst as ApproxFrom<Src, Scheme>>::Err

The error type produced by a failed conversion.

fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>

Convert the subject into an approximately equivalent representation.

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T, Dst> ConvAsUtil<Dst> for T

fn approx(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

Approximate the subject with the default scheme.

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

Approximate the subject with a specific scheme.

impl<T> ConvUtil for T

fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

Approximate the subject to a given type with the default scheme.

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

Approximate the subject to a given type with a specific scheme.

fn into_as<Dst>(self) -> Dst where
Self: Into<Dst>,

Convert the subject to a given type.

fn try_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: TryInto<Dst>,

Attempt to convert the subject to a given type.

fn value_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ValueInto<Dst>,

Attempt a value conversion of the subject to a given type.

source

impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,

source

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for T where
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<T, U> IntoColor for T where
U: FromColor<T>,

source

fn into_color(self) -> U

Convert into T with values clamped to the color defined bounds Read more

source

impl<T, U> IntoColorUnclamped for T where
U: FromColorUnclamped<T>,

source

fn into_color_unclamped(self) -> U

Convert into T. The resulting color might be invalid in its color space Read more

source

impl<T> ToOwned for T where
T: Clone,

type Owned = T

The resulting type after obtaining ownership.

source

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

source

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

source

impl<T> ToString for T where
T: Display + ?Sized,

source

default fn to_string(&self) -> String

Converts the given value to a String. Read more

impl<Src> TryFrom<Src> for Src

type Err = NoError

The error type produced by a failed conversion.

fn try_from(src: Src) -> Result<Src, <Src as TryFrom<Src>>::Err>

Convert the given value into the subject type.

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<Src, Dst> TryInto<Dst> for Src where
Dst: TryFrom<Src>,

type Err = <Dst as TryFrom<Src>>::Err

The error type produced by a failed conversion.

fn try_into(self) -> Result<Dst, <Src as TryInto<Dst>>::Err>

Convert the subject into the destination type.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

source

impl<T, U> TryIntoColor for T where
U: TryFromColor<T>,

source

fn try_into_color(self) -> Result<U, OutOfBounds>

Convert into T, returning ok if the color is inside of its defined range, otherwise an OutOfBounds error is returned which contains the unclamped color. Read more

Struct charts::prelude::sync::mpsc::SendError

Tuple Fields

Trait Implementations

impl<T> Clone for SendError<T> where T: Clone,

fn clone(&self) -> SendError<T>

fn clone_from(&mut self, source: &Self)

impl<T> Debug for SendError<T>

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl<T> Display for SendError<T>

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl<T> Error for SendError<T> where T: Send,

fn description(&self) -> &str

fn source(&self) -> Option<&(dyn Error + 'static)>

fn cause(&self) -> Option<&dyn Error>

fn provide(&'a self, req: &mut Demand<'a>)

impl<T> From<SendError<T>> for TrySendError<T>

fn from(err: SendError<T>) -> TrySendError<T>

impl<T> PartialEq<SendError<T>> for SendError<T> where T: PartialEq<T>,

fn eq(&self, other: &SendError<T>) -> bool

fn ne(&self, other: &SendError<T>) -> bool

impl<T> Copy for SendError<T> where T: Copy,

impl<T> Eq for SendError<T> where T: Eq,

impl<T> StructuralEq for SendError<T>

impl<T> StructuralPartialEq for SendError<T>

Auto Trait Implementations

impl<T> RefUnwindSafe for SendError<T> where T: RefUnwindSafe,

impl<T> Send for SendError<T> where T: Send,

impl<T> Sync for SendError<T> where T: Sync,

impl<T> Unpin for SendError<T> where T: Unpin,

impl<T> UnwindSafe for SendError<T> where T: UnwindSafe,

Blanket Implementations

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where T: FloatComponent, Swp: WhitePoint, Dwp: WhitePoint, D: AdaptFrom<S, Swp, Dwp, T>,

fn adapt_into_using<M>(self, method: M) -> D where M: TransformMatrix<Swp, Dwp, T>,

fn adapt_into(self) -> D

impl<T> Any for T where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where Scheme: ApproxScheme,

type Err = NoError

fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where Dst: ApproxFrom<Src, Scheme>, Scheme: ApproxScheme,

type Err = <Dst as ApproxFrom<Src, Scheme>>::Err

fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>

impl<T> Borrow<T> for T where T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T, Dst> ConvAsUtil<Dst> for T

fn approx(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, DefaultApprox>,

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

impl<T> ConvUtil for T

fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, DefaultApprox>,

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

fn into_as<Dst>(self) -> Dst where Self: Into<Dst>,

fn try_as<Dst>(self) -> Result<Dst, Self::Err> where Self: TryInto<Dst>,

fn value_as<Dst>(self) -> Result<Dst, Self::Err> where Self: ValueInto<Dst>,

impl<Q, K> Equivalent<K> for Q where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

fn into(self) -> U

impl<T, U> IntoColor<U> for T where U: FromColor<T>,

fn into_color(self) -> U

impl<T, U> IntoColorUnclamped<U> for T where U: FromColorUnclamped<T>,

fn into_color_unclamped(self) -> U

impl<T> ToOwned for T where T: Clone,

type Owned = T

fn to_owned(&self) -> T

fn clone_into(&self, target: &mut T)

impl<T> ToString for T where T: Display + ?Sized,

default fn to_string(&self) -> String

impl<Src> TryFrom<Src> for Src

type Err = NoError

fn try_from(src: Src) -> Result<Src, <Src as TryFrom<Src>>::Err>

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<Src, Dst> TryInto<Dst> for Src where Dst: TryFrom<Src>,

type Err = <Dst as TryFrom<Src>>::Err

fn try_into(self) -> Result<Dst, <Src as TryInto<Dst>>::Err>

impl<T> Clone for SendError<T> where
T: Clone,

impl<T> Error for SendError<T> where
T: Send,

impl<T> PartialEq<SendError<T>> for SendError<T> where
T: PartialEq<T>,

impl<T> Copy for SendError<T> where
T: Copy,

impl<T> Eq for SendError<T> where
T: Eq,

impl<T> RefUnwindSafe for SendError<T> where
T: RefUnwindSafe,

impl<T> Send for SendError<T> where
T: Send,

impl<T> Sync for SendError<T> where
T: Sync,

impl<T> Unpin for SendError<T> where
T: Unpin,

impl<T> UnwindSafe for SendError<T> where
T: UnwindSafe,

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where
T: FloatComponent,
Swp: WhitePoint,
Dwp: WhitePoint,
D: AdaptFrom<S, Swp, Dwp, T>,

fn adapt_into_using<M>(self, method: M) -> D where
M: TransformMatrix<Swp, Dwp, T>,

impl<T> Any for T where
T: 'static + ?Sized,

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where
Scheme: ApproxScheme,

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

fn approx(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

fn into_as<Dst>(self) -> Dst where
Self: Into<Dst>,

fn try_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: TryInto<Dst>,

fn value_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ValueInto<Dst>,

impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T, U> IntoColor<U> for T where
U: FromColor<T>,

impl<T, U> IntoColorUnclamped<U> for T where
U: FromColorUnclamped<T>,

impl<T> ToOwned for T where
T: Clone,

impl<T> ToString for T where
T: Display + ?Sized,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<Src, Dst> TryInto<Dst> for Src where
Dst: TryFrom<Src>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

impl<T, U> TryIntoColor<U> for T where
U: TryFromColor<T>,

impl<V, T> VZip<V> for T where
V: MultiLane<T>,

impl<Src, Dst> ValueInto<Dst> for Src where
Dst: ValueFrom<Src>,

impl<T> Any for T where
T: Any,

impl<T> CloneAny for T where
T: Any + Clone,