Enum charts::prelude::sync::mpsc::TryRecvError

1.0.0 · source · [−]

pub enum TryRecvError {
    Empty,
    Disconnected,
}

Expand description

This enumeration is the list of the possible reasons that try_recv could not return data when called. This can occur with both a channel and a sync_channel.

Variants

`Empty`

This channel is currently empty, but the Sender(s) have not yet disconnected, so data may yet become available.

`Disconnected`

The channel’s sending half has become disconnected, and there will never be any more data received on it.

Trait Implementations

source

impl Clone for TryRecvError

source

fn clone(&self) -> TryRecvError

Returns a copy of the value. Read more

source

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

source

impl Debug for TryRecvError

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

source

impl Display for TryRecvError

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

source

impl Error for TryRecvError

source

fn description(&self) -> &str

👎 Deprecated since 1.42.0:

use the Display impl or to_string()

fn source(&self) -> Option<&(dyn Error + 'static)>

The lower-level source of this error, if any. Read more

source

fn cause(&self) -> Option<&dyn Error>

👎 Deprecated since 1.33.0:

replaced by Error::source, which can support downcasting

source

fn provide(&'a self, req: &mut Demand<'a>)

🔬 This is a nightly-only experimental API. (error_generic_member_access)

Provides type based access to context intended for error reports. Read more

1.24.0 · source

impl From<RecvError> for TryRecvError

source

fn from(err: RecvError) -> TryRecvError

Converts a RecvError into a TryRecvError.

This conversion always returns TryRecvError::Disconnected.

No data is allocated on the heap.

source

impl PartialEq<TryRecvError> for TryRecvError

source

fn eq(&self, other: &TryRecvError) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

source

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

source

impl StructuralPartialEq for TryRecvError

Auto Trait Implementations

impl RefUnwindSafe for TryRecvError

impl Send for TryRecvError

impl Sync for TryRecvError

impl Unpin for TryRecvError

impl UnwindSafe for TryRecvError

Blanket Implementations

source

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where
 T: FloatComponent,
 Swp: WhitePoint,
 Dwp: WhitePoint,
 D: AdaptFrom<S, Swp, Dwp, T>,

source

fn adapt_into_using<M>(self, method: M) -> D where
M: TransformMatrix<Swp, Dwp, T>,

Convert the source color to the destination color using the specified method Read more

source

fn adapt_into(self) -> D

Convert the source color to the destination color using the bradford method by default Read more

source

impl<T> Any for T where
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where
Scheme: ApproxScheme,

type Err = NoError

The error type produced by a failed conversion.

fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>

Convert the given value into an approximately equivalent representation.

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,

type Err = <Dst as ApproxFrom<Src, Scheme>>::Err

The error type produced by a failed conversion.

fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>

Convert the subject into an approximately equivalent representation.

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T, Dst> ConvAsUtil<Dst> for T

fn approx(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

Approximate the subject with the default scheme.

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

Approximate the subject with a specific scheme.

impl<T> ConvUtil for T

fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

Approximate the subject to a given type with the default scheme.

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

Approximate the subject to a given type with a specific scheme.

fn into_as<Dst>(self) -> Dst where
Self: Into<Dst>,

Convert the subject to a given type.

fn try_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: TryInto<Dst>,

Attempt to convert the subject to a given type.

fn value_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ValueInto<Dst>,

Attempt a value conversion of the subject to a given type.

source

impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,

source

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for T where
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<T, U> IntoColor for T where
U: FromColor<T>,

source

fn into_color(self) -> U

Convert into T with values clamped to the color defined bounds Read more

source

impl<T, U> IntoColorUnclamped for T where
U: FromColorUnclamped<T>,

source

fn into_color_unclamped(self) -> U

Convert into T. The resulting color might be invalid in its color space Read more

source

impl<T> ToOwned for T where
T: Clone,

type Owned = T

The resulting type after obtaining ownership.

source

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

source

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

source

impl<T> ToString for T where
T: Display + ?Sized,

source

default fn to_string(&self) -> String

Converts the given value to a String. Read more

impl<Src> TryFrom<Src> for Src

type Err = NoError

The error type produced by a failed conversion.

fn try_from(src: Src) -> Result<Src, <Src as TryFrom<Src>>::Err>

Convert the given value into the subject type.

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<Src, Dst> TryInto<Dst> for Src where
Dst: TryFrom<Src>,

type Err = <Dst as TryFrom<Src>>::Err

The error type produced by a failed conversion.

fn try_into(self) -> Result<Dst, <Src as TryInto<Dst>>::Err>

Convert the subject into the destination type.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

source

impl<T, U> TryIntoColor for T where
U: TryFromColor<T>,

source

fn try_into_color(self) -> Result<U, OutOfBounds>

Convert into T, returning ok if the color is inside of its defined range, otherwise an OutOfBounds error is returned which contains the unclamped color. Read more

Enum charts::prelude::sync::mpsc::TryRecvError

Variants

Empty

Disconnected

Trait Implementations

impl Clone for TryRecvError

fn clone(&self) -> TryRecvError

fn clone_from(&mut self, source: &Self)

impl Debug for TryRecvError

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl Display for TryRecvError

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl Error for TryRecvError

fn description(&self) -> &str

fn source(&self) -> Option<&(dyn Error + 'static)>

fn cause(&self) -> Option<&dyn Error>

fn provide(&'a self, req: &mut Demand<'a>)

impl From<RecvError> for TryRecvError

fn from(err: RecvError) -> TryRecvError

impl PartialEq<TryRecvError> for TryRecvError

fn eq(&self, other: &TryRecvError) -> bool

fn ne(&self, other: &Rhs) -> bool

impl Copy for TryRecvError

impl Eq for TryRecvError

impl StructuralEq for TryRecvError

impl StructuralPartialEq for TryRecvError

Auto Trait Implementations

impl RefUnwindSafe for TryRecvError

impl Send for TryRecvError

impl Sync for TryRecvError

impl Unpin for TryRecvError

impl UnwindSafe for TryRecvError

Blanket Implementations

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where T: FloatComponent, Swp: WhitePoint, Dwp: WhitePoint, D: AdaptFrom<S, Swp, Dwp, T>,

fn adapt_into_using<M>(self, method: M) -> D where M: TransformMatrix<Swp, Dwp, T>,

fn adapt_into(self) -> D

impl<T> Any for T where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where Scheme: ApproxScheme,

type Err = NoError

fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where Dst: ApproxFrom<Src, Scheme>, Scheme: ApproxScheme,

type Err = <Dst as ApproxFrom<Src, Scheme>>::Err

fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>

impl<T> Borrow<T> for T where T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T, Dst> ConvAsUtil<Dst> for T

fn approx(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, DefaultApprox>,

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

impl<T> ConvUtil for T

fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, DefaultApprox>,

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where Self: ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

fn into_as<Dst>(self) -> Dst where Self: Into<Dst>,

fn try_as<Dst>(self) -> Result<Dst, Self::Err> where Self: TryInto<Dst>,

fn value_as<Dst>(self) -> Result<Dst, Self::Err> where Self: ValueInto<Dst>,

impl<Q, K> Equivalent<K> for Q where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

fn into(self) -> U

impl<T, U> IntoColor<U> for T where U: FromColor<T>,

fn into_color(self) -> U

impl<T, U> IntoColorUnclamped<U> for T where U: FromColorUnclamped<T>,

fn into_color_unclamped(self) -> U

impl<T> ToOwned for T where T: Clone,

type Owned = T

fn to_owned(&self) -> T

fn clone_into(&self, target: &mut T)

impl<T> ToString for T where T: Display + ?Sized,

default fn to_string(&self) -> String

impl<Src> TryFrom<Src> for Src

type Err = NoError

fn try_from(src: Src) -> Result<Src, <Src as TryFrom<Src>>::Err>

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<Src, Dst> TryInto<Dst> for Src where Dst: TryFrom<Src>,

`Empty`

`Disconnected`

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where
T: FloatComponent,
Swp: WhitePoint,
Dwp: WhitePoint,
D: AdaptFrom<S, Swp, Dwp, T>,

fn adapt_into_using<M>(self, method: M) -> D where
M: TransformMatrix<Swp, Dwp, T>,

impl<T> Any for T where
T: 'static + ?Sized,

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where
Scheme: ApproxScheme,

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

fn approx(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,

fn into_as<Dst>(self) -> Dst where
Self: Into<Dst>,

fn try_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: TryInto<Dst>,

fn value_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ValueInto<Dst>,

impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T, U> IntoColor<U> for T where
U: FromColor<T>,

impl<T, U> IntoColorUnclamped<U> for T where
U: FromColorUnclamped<T>,

impl<T> ToOwned for T where
T: Clone,

impl<T> ToString for T where
T: Display + ?Sized,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<Src, Dst> TryInto<Dst> for Src where
Dst: TryFrom<Src>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

impl<T, U> TryIntoColor<U> for T where
U: TryFromColor<T>,

impl<V, T> VZip<V> for T where
V: MultiLane<T>,

impl<Src, Dst> ValueInto<Dst> for Src where
Dst: ValueFrom<Src>,

impl<T> Any for T where
T: Any,

impl<T> CloneAny for T where
T: Any + Clone,