pub struct SubFilter { /* private fields */ }
Expand description
Sub-filter UID.
Implementations
Methods from Deref<Target = usize>
Trait Implementations
sourceimpl<T: Into<usize>> AddAssign<T> for SubFilter
impl<T: Into<usize>> AddAssign<T> for SubFilter
[non_strict
]
sourcefn add_assign(&mut self, rhs: T)
fn add_assign(&mut self, rhs: T)
Performs the +=
operation. Read more
sourceimpl<'de> Deserialize<'de> for SubFilter
impl<'de> Deserialize<'de> for SubFilter
sourcefn deserialize<D>(deserializer: D) -> Result<Self, D::Error> where
D: Deserializer<'de>,
fn deserialize<D>(deserializer: D) -> Result<Self, D::Error> where
D: Deserializer<'de>,
Deserialize this value from the given Serde deserializer. Read more
sourceimpl Ord for SubFilter
impl Ord for SubFilter
1.21.0 · sourcefn max(self, other: Self) -> Self
fn max(self, other: Self) -> Self
Compares and returns the maximum of two values. Read more
1.21.0 · sourcefn min(self, other: Self) -> Self
fn min(self, other: Self) -> Self
Compares and returns the minimum of two values. Read more
1.50.0 · sourcefn clamp(self, min: Self, max: Self) -> Self where
Self: PartialOrd<Self>,
fn clamp(self, min: Self, max: Self) -> Self where
Self: PartialOrd<Self>,
Restrict a value to a certain interval. Read more
sourceimpl PartialOrd<SubFilter> for SubFilter
impl PartialOrd<SubFilter> for SubFilter
sourcefn partial_cmp(&self, other: &SubFilter) -> Option<Ordering>
fn partial_cmp(&self, other: &SubFilter) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
sourceimpl PartialOrd<usize> for SubFilter
impl PartialOrd<usize> for SubFilter
sourcefn partial_cmp(&self, int: &usize) -> Option<Ordering>
fn partial_cmp(&self, int: &usize) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
impl Copy for SubFilter
impl Eq for SubFilter
impl StructuralEq for SubFilter
impl StructuralPartialEq for SubFilter
Auto Trait Implementations
impl RefUnwindSafe for SubFilter
impl Send for SubFilter
impl Sync for SubFilter
impl Unpin for SubFilter
impl UnwindSafe for SubFilter
Blanket Implementations
impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where
Scheme: ApproxScheme,
impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where
Scheme: ApproxScheme,
type Err = NoError
type Err = NoError
The error type produced by a failed conversion.
fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>
fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>
Convert the given value into an approximately equivalent representation.
impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,
impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,
type Err = <Dst as ApproxFrom<Src, Scheme>>::Err
type Err = <Dst as ApproxFrom<Src, Scheme>>::Err
The error type produced by a failed conversion.
fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>
fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>
Convert the subject into an approximately equivalent representation.
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> ConvUtil for T
impl<T> ConvUtil for T
fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,
fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,
Approximate the subject to a given type with the default scheme.
fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,
fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, Scheme>,
Scheme: ApproxScheme,
Approximate the subject to a given type with a specific scheme.
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
fn vzip(self) -> V
impl<Src> ValueFrom<Src> for Src
impl<Src> ValueFrom<Src> for Src
type Err = NoError
type Err = NoError
The error type produced by a failed conversion.
fn value_from(src: Src) -> Result<Src, <Src as ValueFrom<Src>>::Err>
fn value_from(src: Src) -> Result<Src, <Src as ValueFrom<Src>>::Err>
Convert the given value into an exactly equivalent representation.
impl<Src, Dst> ValueInto<Dst> for Src where
Dst: ValueFrom<Src>,
impl<Src, Dst> ValueInto<Dst> for Src where
Dst: ValueFrom<Src>,
type Err = <Dst as ValueFrom<Src>>::Err
type Err = <Dst as ValueFrom<Src>>::Err
The error type produced by a failed conversion.
fn value_into(self) -> Result<Dst, <Src as ValueInto<Dst>>::Err>
fn value_into(self) -> Result<Dst, <Src as ValueInto<Dst>>::Err>
Convert the subject into an exactly equivalent representation.